Peel strength 
 18 (MPa) 
 Density 
 1.5-1.7 (g/cm3) 
 Film time 
 3 (hours) 
 Tensile adhesion 
 30 (MPa) 
 Elongation 
 100 (%) 
 Place of origin 
 Anhui 
 Brand 
 Country adhesive anchorage 
 Curing time 
 9 (h) 
 Exterior 
 Cream paste 
 Curing conditions 
 Curing at room temperature 





 Factory Direct: country brand strength chemical anchor adhesive bonding steel anchorage anchorage glue gun glue 

 Large supply of high-strength construction anchorage country brand, including cartridges and glue sticks, 
 Specifications: 5kg/20kg 
 Anchorage glue application: 
 Wall bracket, the steel and concrete structure of the anchor connection, the device based on a fixed, elevated noise barriers and the fence fixed, structural reinforcement, anchorage frame buildings, bridges, expansion of reinforcement, concrete pavement repair, fixed on the tunnel pipeline , shear wall anchorage. 
 Description: anchorage is in concrete, brick, rock drilling and other substrates, and then into the anchorage Anchor resin, steel or profiles in place, steel or rubber curing profile and substrate after bonding is one. 
 The main ingredients: Polyester resin, reinforcing filler. Not contain formaldehyde. 
 Main purpose: for construction stone, ceramics, tiles and parquet fast location, repair, bonding. 
 Features: 1 load fast, anti-aging, anti-pull, anti-fatigue, anti-vibration. 2 convenient construction, the top hole, horizontal holes are easy to construction and to ensure the hole is full of glue. 3 anchoring effect as embedded and low cost. 
 Usage: 
 Bonding of the surface to be clean and dry, and slightly rough. Required to take this product in the tank, according to the ratio