Peel strength 
 25 (MPa) 
 Density 
 1.1 (g/cm3) 
 Film time 
 2 (hours) 
 Tensile adhesion 
 23 (MPa) 
 Elongation 
 100 (%) 
 Place of origin 
 Germany 
 Brand 
 Henkel Race Lite color tile grouts 
 Curing time 
 24 (h) 
 Exterior 
 Solid 
 Curing conditions 
 Curing at room temperature 





 Germany's Henkel Race Lite color tile grouts CE36 Wei DS foam protective film 





 Scope 

 Cement for the base material water resistant colored grouts for filling tile 1mm to 2mm wide slit. 

 For filling all kinds of ceramics, mosaics, stone and other wall / floor tile gap. 



 Surface Treatment 

 Tile adhesive to be dried before use pointing agent. Gap to be clean and free of loose material or residual adhesive. 



 Use 

 To match tile grouts CE36 special forces mix the amount of water (see Technical Data), even with an electric beater until no lumps. To increase product flexibility, or the use of pollution-prone areas, such as kitchen and bathroom, B82 can be used instead of water, Dorset special forces to enhance their resistance to water capacity and flexibility. In this case, grouts dry color will appear darker. Gray rubber bottom pad key to Dorset tile grouts CE36 special forces along the diagonal direction of the pressure into the crevices of the tile surface, then the surface excess of grouts with a rubber spoon scrape the bottom ash, and so it dries, with a damp sponge to the surface of the excess tile grouts clean. 24 hours in order to clean with a dry cloth. 



 Amount 

 Based on the different tiles of different sizes and slit width, using different amount of ash. Calculated as a guide